Description
Westcoat EC-24 Temper-CreteTM Urethane is a 100% Solids, two-component, low odor, aromatic urethane resin designed to be used with Westcoat Temper-CreteTM, Temper-CreteTM Broadcast, Temper-CreteTM Trowel Down and Temper-CreteTM Cove Systems.
Uses
EC-24 Temper-CreteTM Urethane is a urethane binder that is combined with TC-24 or TC-74 cements to create monolithic systems that are ideal in service areas where a high build and fast turnaround floor system is required. Perfect for commercial kitchens, restaurants, warehouses, breweries, wineries, chemical processing plants, food processing plants and pharmaceutical facilities.
Advantages
USDA/FDA/ADA Compliant • Thermal Shock Resistant • Low Odor • High Compressive Strength • High Build • Fast Turnaround • Chemical Resistant • Heat Resistant
|
Product Data |
|
Packaging Coverages VOC Content 246 ounce kit Coverage will vary depending on use. 7 gm/l Color Mix Ratio Shelf Life White & Brown 2 years in unopened packaging |
Inspection
Temper-CreteTM should only be applied directly to prepared concrete. Do not apply Temper-CreteTM over existing coatings, tile, wood, etc. Concrete must be clean, dry and free of grease, paint, oil, dust, curing agents or any foreign material that will prevent proper adhesion. Any laitance or weak layers of concrete should be removed, prior to application. The concrete should be at least 3,500 PSI, porous and able to absorb water. A minimum of 14 days curing time is required on all concrete. Do not apply over damp or water-soaked concrete.
Preparation
Pre-cut and clean all cracks and joints with a concrete diamond blade to at least 1⁄4 x 1⁄4 inch. Anchor grooves/keyways should be cut six inches from all free edges, walls, perimeter, drains and both sides of joints. Anchor keyways should be cut to a depth and width two times the thickness of the Temper-CreteTM floor. Prepare concrete to a profile equal to CSP 3-6 as specified by ICRI. Methods may vary according to the condition and hardness of the concrete. When preparing the surface use caution when shot blasting, scarifying too aggressively or grinding too smooth. Do not feather edge the Temper-CreteTM System. Always terminate into an anchor groove/keyway. For more information on preparation, please refer to the appropriate System Specification sheet.
Reviews
There are no reviews yet.