Uses
SC-24 Polish Guard is designed to be used as a finish for polished concrete and polished overlays. This easy to apply finish may be used in both commercial and residential environments.
Advantages
Water-Based • Low Odor • VOC Compliant • Easy to Apply • Burnishable • Enhances Sheen • Easy to Maintain • Cost Effective • Interior Use Only
Product Data |
Packaging Coverages VOC Content 1 gal jug & 5 gal pail ~2000-2500 ft2/gal 0 gm/l Colors Mix Ratio Shelf Life Clear N/A – May be thinned with water if needed (see “Thinning” paragraph for further information). 2 years in unopened packaging |
Inspection
Surfaces must be structurally sound. The surface must be dry and free of oil, grease, curing agents, dirt, dust or other foreign material that may prevent proper adhesion.
Moisture
All concrete should be tested for moisture before applying a seamless coating. If moisture emissions exceed 5 lbs/1000 square feet (ASTM F1869) or if the relative humidity (RH) exceeds 75% (ASTM F2170), contact the manufacturer before application.
Preparation
For concrete, the surface should be at least 2500 psi and have cured for a minimum of 28 days. Prior to starting work, test existing concrete slab for efflorescence, moisture and hydrostatic pressure. Vacuum surface entirely and ensure that any dust or contaminates are removed, as these will deter adhesion. SC-24 Polish Guard may be applied once the floor is polished to the desired level.
Mixing
Pre-mix SC-24 prior to application, by slowly mixing with a low rpm drill.
Reviews
There are no reviews yet.