Description
Westcoat EC-12 Epoxy Primer is a two component, 100% solids, low viscosity, moisture tolerant, fast drying, high strength and multi-purpose epoxy primer.
Uses
EC-12 is used to prime concrete, metal and wood, as well as many other existing coatings. It is an all- around concrete primer/sealer.
Advantages
USDA/FDA Compliant • 100% Solids • Low Viscosity • Chemical Resistant • High Build • Convenient 2:1 Mix • High Strength • Superior Adhesion
|
Product Data |
|
Packaging Coverages VOC Content 1.5 gal & 15 gal kits available ~300 ft2 / US gal. 0 gm/l Color Mix Ratio Shelf Life Black, Cape Cod Gray, Clear, Concrete Gray, Deep Tan, Pewter Gray, Safety Blue, Safety Green, Safety Red, Safety Yellow, Stone Gray, Travatan, Tile Red, White 2:1 (By Volume) |
Inspection
The surface must be structurally sound, clean, dry and free of grease, paint, oil, dust, curing agents, laitance or any foreign material that will prevent proper adhesion. The concrete should be at least 2,500 PSI and porous or rough enough to allow the product to soak in. A minimum of 28 days curing time is required on all concrete. Prior to starting work, test existing concrete slab for efflorescence, moisture and hydrostatic pressure.
Preparation
Pre-cut and clean all cracks and joints with a concrete diamond blade to at least 1⁄4 x 1⁄4 inch. Prepare concrete to a profile equal to CSP 3-4 as specified by ICRI. Methods may vary according to the condition and hardness of the concrete. Other factors include the forecasted use of the surface and the environment in which it is to be installed. When preparing the surface use caution when shot blasting, scarifying too aggressively, leaving grind marks or grinding too smooth. Please refer to desired System Specification Sheet for more information on preparation.
Download EC12 Epoxy Primer Datasheet
Reviews
There are no reviews yet.